上海挡边输送带专卖
挡边输送带
Side Wsll Conveyor Belt
波状挡边输送带一般和波状挡边输送带配合使用,其使用角度一般≥30o,也可和通用带式输送机配套,用于水平、短距离输送(此时一般不设隔板)。
波状挡边输送带采用成槽度不大于0.03的基带和挡边、横隔板(水平输送可不要)经两次硫化制成。
采用两次硫化工艺制成的波状挡边输送带和采用胶粘工艺制成的同类产品相比,具有粘合强度高、屈挠性好,使用中不易产生挡边、隔板开裂、脱落等现象,可大大延长使用寿命。

为了防止输送物料的撒落,可使用挡边输送带,该带
由带体和挡边组成,其结构和性能如下表:
Raised edge conveyor belt is often used to prevent scatter of conveyed materials,which is composed of belt and raised edge.The structure and character are sa the
chart below.

本公司可供应挡边输送带宽度为500一2000mm。
按照使用性能,可提供普通型、耐热型、耐寒型、耐酸碱型、导电型、耐高温型(不高于150℃)及卫生型等。其它类型挡边或特殊性能要求的挡边输送带可协商试制。
The width of side wall conveyor betl that the corporation can provide is no more than 3100mm,We can provide such products as conventional-type,heat-resistant type,cold-resistent type,acid and alkali resistant type,static electrtcily.conductive-type,hightemperature resistant type(≤150℃) and hygiene-type,etc
The conveyor belt with other type of side wall or special characters required,we could negotiate to trialmanufacture.

